Monday After we had that done we drew up where the bars were going to go. 2 Steps Taken to Reach Objective: Objective (s): Worked on the rear end for the formula car to get the mock up done. List issues / Complications: 1 3 4 When the bars were drawn we measured out the pieces. How to make the rear end level. First we made sure that the left side of the rear end was good. After measured we cut the pieces. Tuesday Before we finished up the rear end we had to make the plate for the wheel. 2 Steps Taken to Reach Objective: Objective (s): Worked on the right side of the rear end for the formula car. List issues / Complications: 1 3 4 Once we got done with the plate we attached all of the bars. How to make it the same as the other side. Once the pieces were cut for the right side we began to attach them. When the bars were attached we made sure that they were level. Wednesday Once we figured out the design we started to get the dimensions. 2 Steps Taken to Reach Objective: Objective (s): Finished the mock up for the rear end out in the lab. List issues / Complications: 1 3 4 After we had the dimensions we began to make it in inventor. How to make the whole thing in inventor. Once everything was done with the rear end we started figuring out how to make it on inventor. Thursday Sabo started by doing the motor. 2 Steps Taken to Reach Objective: Objective (s): We started to make the rear end 90 and the motor in inventor. List issues / Complications: 1 3 4 Nathan started by doing the frame for the rear end. What to make the rear end out of. I started by working on the 90. Me and Sabo finished the 90 and the motor. Friday Figured out what we wanted to use and the dimensions for it. 2 Steps Taken to Reach Objective: Objective (s): I finished up on most of the rear end in inventor. List issues / Complications: 1 3 4 Extruded all of the bars for the dimensions that I found. Where to make the middle bars to mount the 90. I started by extruding all of the bars. Split the middle two bars to show that they needed to be further apart.